VMware VCENTER APPLICATION DISCOVERY MANAGER 6.1 - REPOSITORY Manual de usuario Pagina 113

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 220
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 112
OneCommand™ Manager Application P007997-01A Rev. B
8. Managing Adapters and Ports
FC/FCoE
113
Setting Driver Parameters for All Adapters in a Host
To change the driver parameters for all adapters installed in a host:
1. Do one of the following:
From the View menu, click Group Adapters by Host Name.
From the toolbar, click Group Adapters by Host Name.
2. In the discovery-tree, click the host whose adapter driver parameters you want to
change.
3. Select the Host Driver Parameters tab. If there are adapters with different driver
types installed, the Installed Driver Types menu shows a list of all driver types and
driver versions that are installed. Select the driver whose parameters you want to
change. This menu does not appear if all the adapters are using the same driver.
4. In the Host Driver Parameters tab, click the parameter that you want to change. A
description of the parameter appears on the right side of the tab.
Figure 8-27 Host Driver Parameters Tab – Host Selected
5. Enter a new value in the Value field in decimal or hexadecimal format, depending
on how the current value is presented. If the value is in hexadecimal format, it is
prefaced by “0x” (for example -”0x2d”).
Vista de pagina 112
1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 219 220

Comentarios a estos manuales

Sin comentarios