VMware VCENTER CONFIGURATION MANAGER 5.3 Manual de servicio Pagina 134

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 210
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 133
VSPEX Configuration Guidelines
VMware Horizon View 5.3 and VMware vSphere for up to 2,000 Virtual
Desktops Enabled by Brocade Network Fabrics, EMC VNX, and EMC Next-
Generation Backup
134
BRCD6740-RB21# show port-profile status associated
Port-Profile PPID Activated Associated MAC Interface
auto-dvPortGroup_4_0 4 Yes 0050.567e.98b0 None
auto-dvPortGroup_vlag 5 Yes 0050.5678.eaed None
auto-for_nfs 6 Yes 0050.5673.85f9 None
Some current storage arrays like EMC’s VNX 5400 support LACP-based
dynamic LAGs, so in order to provide link and node level redundancy,
dynamic LACP based vLAGS can be configured on the Brocade VDX
switches.
Note: In some port-channel configurations, depending on the storage
ports (1G or 10G), the speed on the port-channel might need to be set
manually on the VDX 6740 as shown in the following example:
BRCD6740# configure terminal
BRCD6740(config)# interface Port-channel 33
BRCD6740(config-Port-channel-33)# speed
[1000,10000,40000] (1000): 10000
BRCD6740(config-Port-channel-33)#
To configure dynamic vLAGS on each Brocade VDX 6740 switch interface,
use the following steps-
1. Configure vLAG Port-channel Interface on BRCD6740-RB21 for
VNX(enabled for storage VLAN 20)
BRCD6740-RB21# configure terminal
BRCD6740-RB21(config)# interface Port-channel 33
BRCD6740-RB21(config-Port-channel-33)# mtu 9216
BRCD6740-RB21(config-Port-channel-33)# description VNX-vLAG-33
BRCD6740-RB21(config-Port-channel-33)# switchport
BRCD6740-RB21(config-Port-channel-33)# switchport mode trunk
BRCD6740-RB21(config-Port-channel-33)# switchport trunk allowed
vlan 20
2. Configure Interface TenGigabitEthernet 21/0/23 and 21/0/24 on
BRCD6740-RB21 for Port-Channel 33.
BRCD6740-RB21# configure terminal
BRCD6740-RB21(config)# interface TenGigabitEthernet 21/0/23
BRCD6740-RB21(conf-if-te-21/0/23)# description VNX-SPA-fxg-1-0
BRCD6740-RB21(conf-if-te-21/0/23)# channel-group 33 mode active
type standard
BRCD6740-RB21(conf-if-te-21/0/23)# lacp timeout long
BRCD6740-RB21(conf-if-te-21/0/23)# no shutdown
Vista de pagina 133
1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 209 210

Comentarios a estos manuales

Sin comentarios