VMware VIEW 4.5 Manual de usuario descargar pdf (Pagina 24)

3 - 1

Configuring the BIG-IP APM for View 4.5

In this chapter, we configure the BIG-IP APM for VMware View 4.5.

Configuring remote access

To configure Remote Access, we use the Network Access Setup Wizard for

Remote access.

To configure remote access using the wizard

1. On the Main tab, expand Templates and Wizards, and then click

Device Wizards.

2. In the Access Policy Manager Configuration row, click the

Network Access Setup Wizard for Remote Access, and then click

the Next button.

3. On the Basic Properties page, configure the following:

a) In the Policy Name box, type a name. In our example, we type

View-access.

b) From the Default Language list, select a language. We leave en

selected.

c) In the Client Side Checks row, leave the Enable Antivirus

Check in Access Policy box checked.

d) Click Next.

4. On the Select Authentication page, click the Active Directory

option button, and then click Next.

5. On the Configure AAA Server page, configure the properties as

appropriate for your installation (you must type a Domain Name at

the minimum), and then click the Next button.

6. On the Configure Lease Pool page, you can either enter individual

IP addresses, or define a range of IP addresses. In our example, we

use an IP address range, so we perform the following:

a) In the Type section, click IP Address Range.

b) In the Start IP Address box, type the appropriate IP address. In

our example, we type 192.0.2.1.

c) In the End IP Address box, type the appropriate IP address. In

our example, we type 192.0.2.254.

d) Click the Add button, and then click the Next button.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 37 38

Sin comentarios

VMware VIEW 4.5 Manual de usuario Pagina 24